Publications written by Granular Dynamics Lab.
1. Papers
K. Shimoji, K. Natori, M. Saeki: Analysis of granular damping induced by mechanical stirring, Granular Matter, Vol. 24, Issue 4(2022).
T. Kuriyama and M. SAEKI：Investigation of dynamic characteristics of rolling particle dampers, Journal of Vibration and Control, Vol. 27, Issue 19-20(2021), , pp. 2243-2252.
R. Tsuda and M. Saeki：Efficiency of vibrational energy dissipation by tuned rolling-cylinder dampers，Journal of Sound and Vibration， Volume 463(2019), 114977.
M. Saeki, T. Mizoguchi and M. Bitoh: Particle damping: Noise characteristics and large-scale simulation，Journal of Vibration and Control, Vol. 24, Issue 17(2018), pp. 3920-3930.
M. Suzuki, S.Iwase, Y. Koike and M. Saeki：Development of Electrostatic Separator of Foreign Objects in Dried Foods，Japan Journal of Food Engineering，Vol. 18, No.1 (2017), pp.61～69.
T. Kidokoro, R. Arai and M. Saeki: Investigation of dynamics simulation of granular particles using spherocylinder model，Granular matter, Vol. 17, Issue 6 (2015), pp.743～751.
T. Ogawa and M. Saeki:Study on Electrostatic Separation Using Shock Absorbing Sheets，Journal of MMIJ，Vol. 130, No.12 (2014), pp.534～540.
Y. Orii, S. Ishigaki, K. Tsugihashi, K. Masuda and M. Saeki: Collision Analysis between Granular Materials and Elastic Plate，Transactions of the Japan Society of Mechanical Engineers, 78－789Ｃ (2012), pp. 1542～1552.
T. Nogami, S. Takahashi and M. Saeki: Analysis of Particle Damping with Hollow Steel Particles，Transactions of the Japan Society of Mechanical Engineers，77－783Ｃ (2011), pp. 4058～4067.
M. Saeki: Development of Electrostatic Separator Using Cylindrical Electrodes，Transactions of the Japan Society of Mechanical Engineers，77－780Ｃ (2011), pp. 2953～2961.
M. Saeki: Vibro-electrostatic separation of plastic mixtures (3rd report, effect of inclination on separation efficiency in inclined electrodes)，Transactions of the Japan Society of Mechanical Engineers，74－742Ｃ (2008), pp.1402～1408.
M. Saeki: Triboelectric Separation of Three-Component Plastic Mixture, Particulate Science and Technology, Vol. 26-5(2008), pp. 494 - 506．
M. Saeki and A. Masumoto：Electrostatic separation of chopped waste electric cables，Journal of environment and engineering，Vol. 2, No.2 (2007), pp.227～236.
M. Saeki and A. Masumoto：Vibratory Separation of Conductor-insulation Mixtures Using Induction Charging (2nd Report, Effect of Corona or Triboelectric Charging on Separation Efficiency)，Transactions of the Japan Society of Mechanical Engineers，72－718Ｃ (2006),pp. 1819～1825.
M. Saeki: Vibratory separation of plastic mixtures using triboelectric charging, Particulate Science and Technology, 24(2006), pp.153～164．
M. Saeki：Vibro-Electrostatic Separation of Plastic Mixtures (2nd Report, Plastic Mixtures of Three Kinds of Components)，Transactions of the Japan Society of Mechanical Engineers，71－707Ｃ (2005), pp.2180～2186.
M.Saeki：Analytical study of multi unit particle damping, Journal of Sound and Vibration, Vol. 281, No. 3-5(2005), pp. 1133～1144.
M. Saeki，T. Inoue, M. Tsukahara, H. Maehata：Development of Electrostatic Separator Equipped with Moving Belt Electrode，Transactions of the Japan Society of Mechanical Engineers, 69－688Ｃ (2003), pp. 3358～3363．
M. Saeki，M. Tsukahara，T. Inoue，H. Maehata，S. Takasono：Vibratory Separation of Conductor-Insulation Mixtures Using Induction Charging，Transactions of the Japan Society of Mechanical Engineers，69－686Ｃ (2003), pp. 2653～2658.
M. Saeki：Damping Effect of Particle Impact Dampers Using a Cylindrical Container，Transactions of the Japan Society of Mechanical Engineers，68－673Ｃ(2002) , pp. 2585～2590.
M. Saeki，T. Inoue，M. Tsukahara，H. Maehata：Vibro-Electrostatic Separation of Plastic Mixtures ，Transactions of the Japan Society of Mechanical Engineers，68－669Ｃ(2002), pp. 1356～1362.
M.Saeki：Impact damping with granular materials in a horizontally vibrating system, Journal of Sound and Vibration, Vol. 251, No. 1(2002), pp. 153～161.
E. Takano，H. Kawaguchi，ZHANG X Y and M. Saeki：Self-excited and Forced Oscillations with Solid Friction. 3rd Report. Piecewise Linear Approximate Solutions in Case of Combined Friction-Velocity Characteristics.，Transactions of the Japan Society of Mechanical Engineers，67－658Ｃ(2001) , pp. 1712～1718.
E. Takano，H. Kawaguchi，ZHANG X Y and M. Saeki：Self-excited and Forced Oscillations with Solid Friction. 2nd Report. Occurrence of Limit Cycles and Evaluation of Solutions in Case of Combined Friction-Velocity Characteristics.，Transactions of the Japan Society of Mechanical Engineers，67－658Ｃ(2001) , pp.1705～1711.
E. Takano，H. Kawaguchi，ZHANG X Y and M. Saeki：Self-excited and Forced Oscillations with Solid Friction. 1st Report. Solutions and Stabilities by Averaging Method in Case of Combined Friction-Velocity Characteristics of Linear and Hyperbolic Curves. ，Transactions of the Japan Society of Mechanical Engineers，67－658Ｃ(2001) , pp.1697～1704.
M. Saeki：Response of Impact Dampers with Granular Materials in a Vertically Vibrating System，Transactions of the Japan Society of Mechanical Engineers，67－657Ｃ(2001) , pp. 1438～1443.
M. Saeki，T. Imanishi and E. Takano：Analysis of Impact Damper with Granular Materials using Discrete Element Method，Transactions of the Japan Society of Mechanical Engineers，66－652Ｃ(2000) , pp. 3828～3833.
E. Takano，M. Saeki，R. Kumakura，H. Takeuchi：On the Occurrence Conditions of Stick-Slip Phenomena in a Hydraulic Driving System. 2nd Report. In Case of Maximum Static Friction Different from Kinetic Friction with out Slipping. ，Transactions of the Japan Society of Mechanical Engineers，66－648Ｃ(2000), pp. 2607～2615.
E. Takano，M. Saeki，R. Kumakura，H. Takasawa：On the Occurrence Conditions of Stick-Slip Phenomena in a Hydraulic Driving System. 1st Report. In Case of Maximum Static Friction Equal to Kinetic Friction without Slipping，Transactions of the Japan Society of Mechanical Engineers，66－648Ｃ(2000), pp. 2597～2606.
M. Saeki，K. Honma，Y. Miyazawa and E. takano：Study on Confectionery Feeder，Transactions of the Japan Society of Mechanical Engineers，66－643Ｃ(2000) , pp. 753～758.
M. Saeki，T. Minagawa and E. Takano：Simulation of Vibratory Conveyance of Granular Materials Using Discrete Element Method，Transactions of the Japan Society of Mechanical Engineers，64－625Ｃ (1998) , pp. 3264～3270.
M. Saeki and E. Takano：Vibratory Conveyance of Granular Materials Comprising Elliptic Particles，Transactions of the Japan Society of Mechanical Engineers，64－625Ｃ(1998) , pp. 3257～3263.
E. Takano，M. Saeki，K. Sasamoto and T. Hisano：On the Occurrence Conditions of Stick-Slip Phenomena，Transactions of the Japan Society of Mechanical Engineers，64－620Ｃ(1998) , pp.1120～1129.
M. Saeki，T. Minagawa and E. Takano：Study on Vibration Conveyance of Granular Materials，Transactions of the Japan Society of Mechanical Engineers，63－615Ｃ(1997) , pp. 3817～3823.
M. Saeki and E. Takano：Oscillations Caused by Solid Friction in Mechanical Driving System.，Journal of Japanese Society of Tribologists，37－10(1992)，P. 860～865.
M. Saeki，Y. Ohya and E. Takano：Oscillations Caused by Solid Friction in a Hydraulic Driving System. In Consideration of Friction-Velocity Characteristics of Hysteresis Curves for Increasing and Decreasing Velocity Motions.，Transactions of the Japan Society of Mechanical Engineers，58－547Ｃ(1992)，P. 910～917.
E. Takano， Y. Ohya and M. Saeki：Oscillations Caused by Solid Friction in a Hydraulic Driving System. In Consideration of Transitional Friction Characteristic Curves for Increasing and Decreasing Velocity Motions. ，Transactions of the Japan Society of Mechanical Engineers，57－540Ｃ(1991)，P. 2539～2547.
M. Saeki，E. Takano，T. Ohmi，H. Isobe，H. kanazawa：Oscillations caused by solid friction in a hydraulic driving system 2nd report, In the case of maximum static friction different from kinetic friction without slipping ，Transactions of the Japan Society of Mechanical Engineers，56－523Ｃ(1990)，P.561～567.
E. Takano，T. Hara and M. Saeki：Oscillations gaused by solid friction in a hydraulic driving system. (1st report In the case of maximum static friction equal to kinetic friction without slipping)，Transactions of the Japan Society of Mechanical Engineers，53－491Ｃ(1987)，P. 1391～1400.
2. Books
「機械振動学」，岩田，佐伯，小松崎，数理工学社.
「基礎演習 機械振動学」，岩田，佐伯，小松崎，数理工学社.
「プラスチックの循環利用拡大に向けたリサイクルシステムと要素技術の開発動向」，分担執筆，サイエンス＆テクノロジー．
「プラスチックのケミカルリサイクル技術」，分担執筆，シーエムシー出版．
「情報社会における食品異物混入対策最前線」，分担執筆，エヌ・ティー・エス．
「リサイクル・廃棄物事典」，分担執筆，産業調査会．
「能登半島及び中越沖地震による地場産業等の被害とその復興に関する臨時調査分科会成果報告書」，分担執筆，（社）日本機械学会.
「制振工学ハンドブック」，分担執筆，コロナ社.
3. Review articles
M. Saeki: Electrostatic separator of foreign objects in dried foods, Clean Technology, Vo.27, No.10(2017), P. 6~9.
M. Saeki: Electrostatic drum separator of foreign objects, Clean Technology, Vo.27, No.10(2017), P. 10~13.
M. Saeki: Novel Developments of Electrostatic Separation Technology, Journal of Japanese Society of Tribologists, Vol. 61，No. 6(2016)，P. 376～381．
佐伯,鈴木：乾燥食材への異物混入を防ぐ静電選別技術，食品機械装置（ビジネスセンター社），Vol. 52，No. 9(2015) P.57～61．
佐伯：リサイクルと静電選別技術，機械の研究（養賢堂），67巻，1号(2015) P.11～17．
M. Saeki: Electrostatic separation, Journal of the Japan Society of AEM, Vol. 11，No.3(2003)，P.141～146．
佐伯，塚原：混合プラスチックの選別技術，機械設計（日刊工業新聞社），46巻，15号(2002)，P. 53～56．
M. Saeki: Recycling of plastics-Development of separation technology－，Journal of Japanese Society of Tribologists, Vol. 47，No. 7(2002)，P. 557～562．
E. Takano and M. Saeki: Recent Advances in Frictional Vibration Analysis, Journal of Japanese Society of Tribologists, Vol. 37，No. 12(1997)，P.990～996.